Installation of the water dispenser line – Samsung RS2555SW-XAC User Manual
Page 27
27
INSTALLATION OF THE WATER DISPENSER LINE
1) Connect to the 3/16” white plastic tube on the back of the
refrigerator.
2) Slip the compression nut onto the white plastic tube.
3) Screw the union into the white plastic tube and tighten the
compression nut.
SEPARATION
OF RED CAP
STICKER
(MONTH INDICATION)
COVER FILTER
ALIGN THE INDICATION MARK
WITH LOCK POSITION.
1) As shown, the fixed cap separate in the refrigerator by rotating it
counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown.
2) Write the month you installed the filter on the label.
EX) If the water filter was installed in March, put “MAR”
3) Remove the protective cap then position and insert the
filter as ishown.
4) Slowly turn the water filter clockwise 90º to align
the indication mark on the cover, locking the filter in posi
tion. Do not overtighten.
Please check that the indication line aligns with the lock position.
Connect the water tube to the refrigerator.
Install the water filter.
Waterline must be connected to potable water only
NOTE
NOTE
Do not overtighten the compression nut.
NOTE
4) Silp the compression sleeve and compression nut on copper
tubing as shown. Tighten the comperssion nut onto the union.
5) Turn water on and check for any leakege.
Nut
Union
Sleeve
Nut