Samsung HPP5581X-XAA - Manual (Page 40)

40
Selecting a broadcast source
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the TV (i.e., an antenna or a cable system).
1 Press the MENU button. Press the ▲ or ▼ button to
select “Channel”, then press the ENTER button.
2 Press the ▲ or ▼ button to select “Auto Program”,
then press the ENTER button.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air”
(antenna) and cable channels. After the available channels are memorized, use the
CH
and CH buttons to scan through the channels. This eliminates the need to
change channels by entering the channel digits. There are three steps for memorizing
channels: selecting a broadcast source, memorizing the channels (automatic) and
adding and deleting channels (manual).
Antenna : Air √
Auto Program √
Add / Delete √
Favorite Channels √
Name √
Fine Tune √
† More
Channel T V
Move Enter Return
Antenna : Air √
Auto Program √
Add / Delete √
Favorite Channels √
Name √
Fine Tune √
† More
Channel T V
Move Enter Return