Samsung MX-E650-ZX - Manual (Page 12)

12
English English
12
English
13
You can store up to:
15 FM stations, 15 AM stations (optional).
1. Select FM or AM by pressing the TUNER/AUX
button on the main unit.
You can select
FM or AM by pressing the FUNC-
TION button on the remote control.
2. To sear ch for a station Press TUNING MODE button
Preset ................... Once or more times until PRESET
is displayed.
You can search the stored frequen-
cies in the Preset mode.
Manually .............. Once or more times until MANUAL
is displayed.
You can search the frequencies one
by one in the Manual mode.
3. Select th e station to be stored by:
• Pressing t he TUNING/ALBUM , or . button on the
remote control button to select the preset station.
• P ress and hold the TUNING/ALBUM , or . button
on the remote control to automatically search for active
broadcasting stations.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor re ception area, select MONO for a
clear, interference-free broadcast.
• This applies only when listening to an FM station.
5. If you do not want to store the radio station found,
revert to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store any other radio frequencies required, repeat
Steps 3 to 4.
➣
In Tuner mode
• In the Manual mode, you can use [ or ] button
on the main unit to manual search a radio station.
• In the Preset mode, you can use [ or ] button on
the main unit to search a stored radio station.
You can listen to a stored radio station as following:
1. Select FM or AM by pressing the TUNER/AUX button
on the main unit.
You can select FM or AM by pressing the FUNCTION
button on the remote control.
2. Press the TUNING MODE button on the remote
control until “ PRESET ” is displayed.
3. Press [,] button on the main unit or TUNING/
ALBUM , , . on the remote control to select a
desired preset number.
Selecting a Stored Station
Recording Function Listening a Radio
You can record sound of the CD, the Radio Broad-
casting or sound from the external source into the
USB storage device.
1. Connect the external USB storage device you want
to record to the USB (
) on your product.
2. Play a Disc, adjust the Radio frequency or connect
the external source to your product.
CD
• Press the MP3/CD on the main unit to select the CD
function.
• Press the OPEN/CLOSE button to open the disc tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use t he CD selection ( [ or ] ) buttons to select the
desired song.
Tuner
• Select TUNER by pressing the TUNER/AUX button
on the main unit.
• Adjust the Radio frequency you want to record.
External Source
• Conn ect an External Component/MP3 player to your
product.
• Pres s the TUNER/AUX button to select input.
• Pla y a song from the external device.
3. Press the USB REC button to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button to start recording
the all tracks of Disc. "FULL CD RECORDING" is
displayed.
• If you play the MP3/WMA file, the file is copied into the
USB device totally.
“CHECK FILE”“COPY XX”“COPY END” is dis-
played. When the recording is done, “STOP” will be
displayed.
• If there is the same file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• RECORDING is displayed .
4. To stop recording, press the STOP (@) button and
then automatically create and save as the MP3 file.
5. To remove the USB device safely, press the STOP (@)
button once again. After the recording, a directory
named “RECORDING”(CD), “CD COPY”(MP3 CD),
“TUNER RECORDING” or “AUX RECORDING”
will be
created in your device.
• Do not disconnect the USB or the AC Cord during the
recording as this may cause file damage.
• If you disconnected USB device during the recording, the
main unit will be power off and you may not delete the
recorded file, In this case, please connect the USB device
to the PC and backup the USB data on the PC first and
then format the USB device.
MX-E630-E650-E661-ENG-0417.indd 12 2012-4-24 18:02:42