Samsung LS27D85KTSR-ZA - Manual (Page 78)

78
Setup and Reset
6
6 Setup and Reset
6.3 DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
z
Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
z
If the monitor (when set to DVI , HDMI or DisplayPort ) is in power saving mode or is displaying the
message Check Signal Cable , press the [ ] button to display the On Screen Display (OSD).
You can select 1.1 or 1.2 .
6.3.1 Configuring DisplayPort Ver.
1
Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to
display the corresponding menu screen.
2
Press [ ] to move to Settings and press [ ] on the product.
3
Press [ ] to move to DisplayPort Ver. and press [ ] on the product.
The following screen will appear.
z
1.1 / 1.2
4
Press [ ] to move to the option you want and press [ ].
5
The selected option will be applied.
Settings
1.1
Auto
Acceleration
Select your
Displayport.
Displayport 1.1
supports HBR 1,
while 1.2 supports
HBR 2.
1.1
1.2
ECO
USB Super Charging
DisplayPort Ver.
PC/AV Mode
Source Detection
Key Repeat Time
Off Timer