Samsung DA-E670 - Manual (Page 3)

Step2. How to upgrade the firmware
[1] Turn the TV on.
[2] Insert the USB Memory Drive containing the Software into the
USB port on the side (or rear) of the TV.
[3] Press the MENU button to display the menu. Press the ▲ or ▼
button to select “ Support”, then press the ENTER button.
[4] Press the ▲ or ▼ button to select “Software Upgrade”, then
press the ENTER button.
[5] The message “Scanning for USB... It may take more than 1
minute.” is displayed.
Software Upgrade
Scanning for USB... It may take more than 1 minute.
[6] Then, the message “Upgrade Version XXXX to version XXXX?
The system will be reset after upgrade.” is displayed.
Select “
Yes”, then press the ENTER button.
And then software is upgraded automatically.
Software Upgrade
Upgrading now. Please do not disconnect USB before
upgrade is completed.
50%
[7] When the Software upgrade is complete; the TV will turn off and then back on by itself.
Software Upgrade
Upgrade is completed. Power will be off 3
seconds from now and turned on automatically.
3. How to Connect TV and Wireless Audio with Dock
[1] Turn on the TV and Wireless Audio with Dock.
[2] TV menu ; System ; Device manager ; SoundShare Settings ; Add New Device ;
Switch the option to 'On' from 'Off'
[3] Switch the Function of Wireless Audio with Dock to TV mode.
[4] The message asking whether to proceed the Bluetooth connection is displayed.
Then, Select “ YES” on the screen.
USB Drive
TV Side Panel