American Standard ASYSTAT302C - Manual (Page 41)

41
Pub. No. 12-5027-01
69-1615
5. Press Heat/Cool Settings to make
selections for the opposite system
setting (either Heat or Cool).
NOTE: If your system is set for Heat, only
the heating temperature will be used.
Similarly, if your system is set for
Cool, only the cooling temperature
will be used. If your system is set for
Auto, either the heating or cooling
temperature may be used depending
on the temperature of the room.
Heat/Cool
Settings
By pressing Heat/Cool Settings, you select the cooling system (if you
already set the heating temperature). The current setting displays.
Example display shows the cooling system was previously set for 78°.
6. Press Increase ▲ or Decrease ▼
until the desired temperature setpoint
displays.
By pressing Increase ▲ or Decrease ▼, you select the cooling Wake temperature.
Example display shows the cooling Wake period set for 76°.
M14592
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Cool
Setting
M14591
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Cool
Setting