AT&T 915 - Manual (Page 14)

This telephone can store 13 telephone
numbers, each up to 16 digits long. You
can dial numbers stored in memory by
pressing one or two buttons.
Directory card
Lift the plastic cover off the directory
card to write the numbers (or names)
stored in telephone memory on the
card. Then replace the cover.
Store a number in
memory
1. Lift the handset.
2. Press and release PROG.
3. Dial the telephone number (up
to 16 digits).
4. Press and release PROG.
5. Press the memory location where
you want to store the number
( , or for one-touch
dialing, or 0 - 9 for two-touch
dialing).
6. Replace the handset.
NOTE: With the handset lifted, you
have limited time to store a number.
If you take too much time, you may
hear a recorded message from your
phone company.
11
Telephone memory
Telephone memory Telephone memory