Samsung PS50B551T3W - Manual (Page 19)

English - 19
Setting up the TV with your PC
Preset: Press the N SOURCE button to select PC mode.
Auto Adjustment
❑
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video
signal. The values of fine, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode. N
Press the T TOOLS button to display Tools menu.
You can also set the adjustment by selecting Tools → Auto Adjustment.
Screen
❑
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
Coarse
„
Adjusts the frequency when vertical noise appears on the screen.
Fine
„
Adjusts the screen to be clearer.
PC Position
„
Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset
„
You can replace all image settings with the factory default values.
Brightness : 45
Sharpness : 50
Auto Adjustment ►
Screen
Advanced Settings
Picture Options
Picture Reset
Picture
BN68-02331B-Eng.indb 19 2009-10-26 �� 10:16:38