Installation instructions 1 – AEG COMPETENCE B8920-1 User Manual
Page 76
76
Installation Instructions
1
Important: The new appliance may only be installed and connected by
an approved specialist.
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
1
Safety Instructions for the Installer
• A device must be provided in the electrical installation which allows
the appliance to be disconnected from the mains at all poles with a
contact opening width of at least 3 mm.
Suitable isolation devices are, for example, circuit breakers, fuses
(screw-type fuses are to be removed from the holder), earth leakage
trips and contactors.
• The installation must guarantee shock protection.
• The stability of the unit in which the appliance is fitted must satisfy
the requirements of DIN 68930.
• Built-in ovens and hobs are fitted with special connector systems.
They may only be combined with appliances with a matching system.