AEG COMPETENCE B8920-1 - Manual (Page 34)

34
Button Lock
To ensure that oven functions set are not accidentally altered.
Setting the Button Lock
1. If required, switch on the appliance by pressing the main power
switch .
2. Select the oven function.
3. Press and hold Programme
and buttons at the same time
for about 2 seconds, until
PROGRAMME LOCK appears in the
display.
The button lock is now engaged.
Releasing the Button Lock
Press and hold Programme
and buttons at the same time for
about 2 seconds.
The button lock is automatically lifted, if the appliance is switched off.
Oven Safety Cut-out
3
If not switched off after a certain time, or if the temperature is not
modified, the oven switches off automatically.
The last temperature set flashes in the temperature display and an au-
dible signal sounds.
The oven switches off when the oven temperature is:
Switching on after a safety cut-out
Switch the oven off completely.
It can then be switched on again.
30 - 120°C after 12.5 hours
120 - 200°C after 8.5 hours
200 - 230°C after 5.5 hours