Figure 4-1 – Campbell Scientific CS705 Tipping Bucket Snowfall Adapter User Manual

Page 9

CS705 Snowfall Adapter

Band Clamp
(pn 20606)

Storage Mount
(pn 20636)

U-bolt Bracket
(pn 20638)

Flat Washers (pn 4365)
Lock Washers (pn 4366)
Nuts (pn 18126)

FIGURE 4-1. CS705 mounted to pole using the CM270 Mounting Kit

U-bolt (pn 17492)

Band Clamp
(pn 20605)

Catch Tube

Antifreeze
Reservoir

TE525WS
(purchased
separately)

Funnel
(pn 14087)

0.5 in O.D.
Stub (connect
hose here)

1. Install the mounting pole.

2. Align the funnel and mounting base to the three holes found on the bottom

of the TE525WS rain gage. The funnel is sandwiched between the rain
gage and mounting base as shown in FIGURE 4-1. Three screws mount
the funnel to the TE525WS.

2. Align the funnel and mounting base to the three holes found on the bottom

of the TE525WS rain gage. The funnel is sandwiched between the rain
gage and mounting base as shown in FIGURE 4-1. Three screws mount
the funnel to the TE525WS.

3. Attach the mounting base and TE525WS to the pole via the U-bolt

bracket, U-bolt, flat washers, lock washers, and nuts (see FIGURE 4-1).

3. Attach the mounting base and TE525WS to the pole via the U-bolt

bracket, U-bolt, flat washers, lock washers, and nuts (see FIGURE 4-1).

4. Take one of the black bands supplied with the CS705 and stretch over the

TE525WS funnel (see FIGURE 4-2).

4. Take one of the black bands supplied with the CS705 and stretch over the

TE525WS funnel (see FIGURE 4-2).