Campbell Scientific COM320 Voice Communications Modem - Manual (Page 42)

Appendix B. Updating and Configuring the COM320
B-8
3) Launch the Device Configuration Utility and select device type Unknown,
the correct PC serial port connected to the COM320, a baud rate of 9600
and press the connect button.
4) By pressing the “V” key you should see a list of words scroll by in the
Device Configuration Utility terminal window.
If you want to save this list to a file, select the Start Export button and enter a
name for the file it will create. Now press the “V” key and wait until the
words stop scrolling and press the End Export button to create the file This
new file is a complete vocabulary list from the COM320 voice modem.
Start with the CRBasic Editor version 3.1 you can select multiple vocabulary
files from the VoiceSpeak vocabulary window if the file name begins with
voice and ends with .txt (i.e. VoiceTestWords.txt). The file needs to be located
in the directory where the CRBasic Editor looks for its compilers (default
location is C:\Campbellsci\Lib\Compilers).