Campbell Scientific CNR2 Radiometer - Manual (Page 3)

CNR2 Table of Contents
PDF viewers note: These page numbers refer to the printed version of this document. Use
the Adobe Acrobat® bookmarks tab for links to specific sections.
1. General Description
.....................................................1
2. Sensor Specifications
.................................................1
2.1 CNR2 Specifications ................................................................................1
2.2 Pyranometer Specifications ......................................................................2
2.3 Pyrgeometer Specifications ......................................................................2
3. Installation
....................................................................2
4. Using the CNR2 in the Two Separate Components
Mode (2SCM)
.............................................................5
4.1 Measuring Solar Radiation with the Pyranometers ..................................5
4.2 Measuring Far Infrared Radiation with the Pyrgeometers........................5
4.3 Calculation of the Net Solar Radiation .....................................................6
5. Wiring
............................................................................6
6. Datalogger Programming
............................................7
6.1 Calibration Factor .....................................................................................8
6.2 Example Programs....................................................................................8
6.2.1 Example Program for CR1000 Datalogger.....................................8
6.2.2 Example Program for CR10X Datalogger ......................................9
7. Calibration
..................................................................11
8. Maintenance
...............................................................12
9. Typical Values
............................................................13
Figures
2-1. The Dimensions of the CNR2 .................................................................2
3-1. Mounting According to Hemisphere.......................................................3
3-2. The CNR2 mounted to a pole (top) and crossarm (bottom) via
the 26120 Mounting Bracket Kit..........................................................4
5-1. Pin Layout on Campbell Scientific Black Cable .....................................6
5-2. Pin Layout on Kipp & Zonen Original Cable .........................................7
i