Campbell Scientific CM106 Tripod - Manual (Page 25)

CM106 Tripod
6.4 CM225 and 18098 Pyranometer Mounting Stand .4 CM225 and 18098 Pyranometer Mounting Stand
The CM225 is used to attach a pyranometer or quantum sensor to a horizontal
pipe (1.0-in. to 2.1-in. OD) or vertical pole (1.0-in. to 2.1-in. OD). The CM225 is used to attach a pyranometer or quantum sensor to a horizontal
pipe (1.0-in. to 2.1-in. OD) or vertical pole (1.0-in. to 2.1-in. OD).
The LI200X pyranometer and LI190SB quantum sensor mount to the CM225
via the LI200S leveling base (see FIGURE 6-4). The CS300 pyranometer
mounts to the CM225 via the 18356 leveling base. The CMP3 and LP02
pyranometers include their own bubble level and leveling screws allowing
them to mount directly to the CM225. The LI200X pyranometer and LI190SB quantum sensor mount to the CM225
via the LI200S leveling base (see
The 18098 provides a larger surface for mounting a user-supplied Eppley
pyranometer. The 18098 provides a larger surface for mounting a user-supplied Eppley
pyranometer.
FIGURE 6-4). The CS300 pyranometer
mounts to the CM225 via the 18356 leveling base. The CMP3 and LP02
pyranometers include their own bubble level and leveling screws allowing
them to mount directly to the CM225.
FIGURE 6-4. CM225 Pyranometer Mounting Stand
CM225
LI200X Pyranometer
LI2003S
CM225
19