Campbell Scientific CM106 Tripod - Manual (Page 12)

CM106 Tripod
5.2 Mast .2 Mast
The CM106 includes a mast extension that can be fully extended for a 3 m
(10 ft) height, or partially extended for a 2.1 m (7 ft) height. Remove the bolts
in the extension, align the holes in the insert with holes in the mast, and install
the four bolts previously removed. Two additional holes spaced 4 in. apart
were added to the mast extension 9/2012. The additional holes make it
possible for the extension to extend 8 in. or 12 in., or 20 in., 24 in., or 28 in.
above the mast depending on which end is inserted in the mast. The CM106 includes a mast extension that can be fully extended for a 3 m
(10 ft) height, or partially extended for a 2.1 m (7 ft) height. Remove the bolts
in the extension, align the holes in the insert with holes in the mast, and install
the four bolts previously removed. Two additional holes spaced 4 in. apart
were added to the mast extension 9/2012. The additional holes make it
possible for the extension to extend 8 in. or 12 in., or 20 in., 24 in., or 28 in.
above the mast depending on which end is inserted in the mast.
FIGURE 5-3. Tripod mast and insert
Extension for
3 m (10 ft) height
Extension for
2.1 m (7 ft) height
Mast
6