Samlex America SK - Manual (Page 14)

3-1-6. Status：Display Power & Fault Status
Green LED LED Signal Status
Solid Power OK
Slow Blink Power Saving
Red LED LED Signal Status
Fast Blink OVP
Slow Blink UVP
Intermittent Blink
Ž Ž Ž Ž Ž Ž
OTP
Solid OLP
3-1-7. Power Saving Mode: Power Saving Mode is adjustable and
set by the Dip Switches, S1, S2 and S3 on the front panel.
Example: With the watt setting at 15W, a 15W↑ load will make the
inverter operate normally, a 15W↓ load will enter into the Power
saving mode.
SK700
SK1000
SK1500 SK2000
SK3000
S1 S2 S3
DISABLE DISABLE DISABLE OFF OFF OFF
15W 20W 40W ON OFF OFF
25W 40W 80W OFF ON OFF
40W 55W 125W ON ON OFF
50W 75W 170W OFF OFF ON
65W 95W 210W ON OFF ON
75W 115W 245W OFF ON ON
85W 135W 280W ON ON ON
12