Samlex America S1500 - Manual (Page 20)

4. Troubleshooting guide：
Problems and Symptoms Possible Cause Solutions
Low output voltage Using average reading
voltmeter
Use true RMS reading meter
and cable.
See page 15
Point 3-7-7. of manual
Load LED bar flash. Overload Reduce load.
No output voltage. Low input voltage. Recharge battery,
And voltage indicator check connections
in lower red zone. and cable.
No output voltage. Thermal shutdown Improve ventilation,
Over Temp indicator Make sure ventilation
on, load less than openings in inverter
1500W. are not obstructed.
Reduce ambient
temperature.
No output voltage, Short circuit or Wiring Check AC wiring
Over Load indicator error. for short circuit or
On. improper polarity (hot
and neutral reversed).
Very high power load Remove load
WARNING!
Do not open or disassemble the Inverter.
Attempting to service the unit yourself may result in a risk of
electrical shock or fire.
17