Samlex America SK350 - Manual (Page 14)

13
3-3. Protections Features:
Model
DC Input (VDC) Over Temperature Protection
Over Voltage Under
Voltage
Alarm
Under
Voltage
INTERIOR
Shut-
down
Restart
Shut-
down
Restart Shut-down Restart
12 V 16V 13V 11.0V <10.5V 12.5
55℃ 45℃ 24 V 32V 26V 22.0V <21.0V 25.0
48V 62V 52V 44.0V <42.0V 50.0
Note: The specifications are subject to change without notice.
3-4. Installation：
Where to install. The power inverter should be installed in a location that
Meets the following requirements：
3-4-1. Dry
– Do not allow water to drip or splash on the inverter.
3-4-2. Cool
– Ambient air temperature should be between 0℃ and 40℃, the
cooler the better.
3-4-3. Safe
– Do not install in a battery compartment or other areas where
flammable fumes may exist, such as fuel storage areas or engine
compartments.
3-4-4. Ventilated
– Allow at least one inch of clearance around the inverter
for air flow. Ensure the ventilation openings on the rear and front
of the unit are not obstructed.
3-4-5. Dust
– Do not install the Inverter in a dusty environments
where are dust, wood particles or other filings/shavings are present.
These dust can be pulled into the unit when the cooling fan is operating.