Install the monorail the power feed canopy, Save these instructions, 1a 2a 1a 2c – LBL Lighting MO 4" Round Direct Feed Dual Feed Canopy User Manual
Page 2: 1a 2b
2
Install the Monorail the Power Feed
Canopy
Remove the power feed cap from the power feed housing.
Completely back out the screw on the power feed cap.
NOTE:
The standoffs should be installed to support the
Monorail while connecting Monorail to the power feed
canopy. Refer to the instruction provided with the standoffs.
SCREW
POWER
FEED CAP
POWER FEED
HOUSING
Place the Monorail into the standoffs and power feed housings.
Screw the power feed cap completely to the power feed
housing. Make sure that the power feed cap is not cross
threaded.
POWER FEED
HOUSING
MONORAIL
POWER
FEED CAP
Tighten the screw on the power feed cap for proper power
connection.
POWER
FEED CAP
SCREW
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!
A Generation Brands Company
1A
2A
1A
2C
1
2
5
3
4
5
1A
2B
1
2
3
4