LBL Lighting LED Illum MO Surf Mag Xfmr 75w 277v/12v LED - Manual (Page 4)

4
BACKPLATE
Mount the backplate to the electrical box with two #8-32
screws.
Reattach the dome cover to the backplate with the screws.
#8-32 SCREW
SCREW
Connect the Monorail to Transformer
Connect the Monorail to the standoffs so that the Monorail is
secured in place. Refer to the instruction provided with the
standoff.
Make sure that the transformer power is off.
Place the power feed housing onto the Monorail.
Completely back out the screw on the power feed cap.
Screw the power feed cap completely to the power feed
housing. Make sure that the power feed cap is not cross
threaded.
Tighten the screw on the power feed cap for proper power
connection.
LED-ILLUMINATED
MONORAIL POWER FEED
HOUSING
POWER
FEED CAP
SCREW
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company A Generation Brands Company
1A 2C
1A 2D
6
5
6 6
5
1A 3A
1A 3B
3
4
5
6
1
2
3
4
5
6