Install the transformer, 1a 1c, 1a 1b 1a 1d – LBL Lighting MO Direct Feed Surf Mag Xfmr 600w 120v/12v User Manual
Page 2
2
Loosen
the three #8-32 flat head screws
(Do Not Remove)
with the provided 3/32 Allen wrench.
Rotate the backplate counter clockwise so that the #8-32 flat
head screws are lined up with vertical cut out portion of the
"L" slots.
Remove the backplate from the housing.
#8-32 SCREW
BACKPLATE
Install the Transformer
Mount the backplate to the electrical box with the provided
two #8-32 screws.
CAUTION:
Turn the power to electrical box off!
#8-32 FLAT
HEAD SCREW
BACKPLATE
3/32 ALLEN
WRENCH
HOUSING
SAFETY WIRE
BACKPLATE
BRACKET
Hook the transformer safety wire onto the backplate bracket.
Connect the backplate green wire to the ground in accordance
with local electrical codes.
Connect the transformer white wire to the neutral power line
wire with a wire nut.
Connect the transformer black wire to the hot power line
wire with a wire nut.
Slide the vertical portion of the housing "L" slots completely
onto the three backplate #8-32 flat head screws.
Rotate the transformer housing clockwise to lock the housing
slots around the #8-32 flat head screws.
Tighten the three #8-32 flat head screws with the 3/32 Allen
wrench to secure the transformer in place.
#8-32 FLAT
HEAD SCREW
3/32 ALLEN
WRENCH
HOUSING
1A
1A
1A
1C
5
1
5
1
2
6
6
2
3
8
7
3
7
8
1A
1B
1A
1D
4
10
9
11
11
9
4
4
10