LBL Lighting FSJ Recessed Can Adapter 6" LED - Manual (Page 3)

3
Installing the Canopy Using the
Butterfly Anchors
Bend the "C" shaped hooks slightly up to hold the butterfly
anchors.
Push the long screws through the canopy holes.
Screw the butterfly anchors onto the tip of the long screws.
BUTTERFLY
ANCHOR
LONG SCREW
CANOPY
ALIGNED BUTTERFLY
ANCHORS
CANOPY
Align and hang the butterfly anchors onto the "C" shaped
hooks on both sides of the down light.
When the butterfly anchors are properly hung onto the "C"
shaped hooks, tighten the long screws by keeping a light
tension on the canopy. This will prevent the butterfly anchors
from slipping off of the "C" shaped hooks.
"C" SHAPED
HOOK
Installing the Canopy Using the
Mounting Brackets
THREADED HOLE
BRACKET
CLEARANCE SIDE
HOLES THREADED SIDE
HOLES
CLEARANCE CENTER
HOLE
There are four mounting brackets, two with threaded holes
and two with clearance holes. Each set uses a threaded and
clearance hole bracket.
"C" SHAPED
HOOK
LONG
SCREW
BUTTERFLY
ANCHOR
3A
1
2
3B
3
4
5
5
1
4A
4 4
5
3
1 1
3
2 2