LBL Lighting LED Illum MO 4" Round Dual Feed Canopy User Manual
4" flexible power feed canopy, Adjust the fixture height
![background image](/manuals/415470/1/background.png)
Installation Instructions for
4" Flexible Power Feed Canopy
980MRLA4PFC-LED
1
1.1
REMOTECNPY-_-LED
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for indoor dry locations only.
Minimum volume of the electrical box must be 6 cubic inches
(98 cubic centimeter).
Adjust the Fixture Height
LED-Illuminated Monorail
Strip the last 4” of the coaxial outer mesh to expose the inner
insulated wire.
Slide the metal sleeve down the wire to the edge of the coaxial
cable.
The overall fixture height (H) is measured from top of the
canopy to the bottom of the power feed. Leave an additional
4” of the coaxial cable for connecting to power.
Once the height is determined, cut the excess coaxial cable.
(H)
POWER FEED
HOUSING
NOTE:
It is recommended to adjust the power feed
height before installing the canopy.
CANOPY
INNER WIRE
COAXIAL CABLE
4”
METAL SLEEVE
1A
1
2
3
4
1A
1A
1B
4
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.