Save these instructions, 1c 1d 1e – LBL Lighting Fusion Jack Canopy 4" Round Dome LED User Manual
Page 2
FUSION JACK PORT
FIXTURE
FUSION JACK
2
TRANSFORMER
DOME
CANOPY
Line up the dome canopy holes with the crossbar holes.
Replace and tighten the flat head screws to secure the dome
canopy in place.
FLAT HEAD SCREW
Screw the fixture Fusion Jack into the Fusion Jack port.
In accordance with local electrical codes, ground the crossbar
and transformer green wire.
Connect the white transformer wire to the neutral power line
wire with a wire nut.
Connect the black transformer wire to the hot power line
wire with a wire nut.
Place the transformer and all wire connections properly inside
the dome canopy.
1C
1D
1E
5
4
3
3
1
3
4
1
5
1
6
1
7
1
8
7
7
FLAT HEAD SCREW
8
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2011 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company