LBL Lighting Fusion Jack Canopy 12.75" 3 Light Round LED - Manual (Page 2)

2
SAVE THESE INSTRUCTIONS!
Secure the mounting plate to the four anchors with the four
provided #8 screws.
#8 SCREW
Insert one end of the safety cable into the mounting plate
safety bracket and insert the other end into the housing safety
bracket.
SAFETY BRACKET
HOUSING
SAFETY CABLE
MOUNTING PLATE
Make sure the mounting plate is grounded in accordance with
local electrical codes.
Connect the housing white wire to the neutral power line wire
with a wire nut.
Connect the housing black wire to the hot power line wire
with a wire nut.
Place all wires and wire nut connections properly inside
the housing.
Slide the housing onto the mounting plate and line up the
housing holes with the mounting plate holes.
Replace and tighten the three #8-32 screws to secure the
housing in place.
Screw each fixture Fusion Jack completely into one Fusion Jack
port.
Turn the power on.
CAUTION: load per RISK OF FIRE. Maximum
port is watt. 75 Do Not Overload!
1E 1H
1F
1G
1I
15
8
9
10
11
12
14
13
15
14
15
14
17
16
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2008 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
8
9
8
8
8
15 15
16 16 16
11
12
10
9