LBL Lighting 2-Circuit MO Straight Conductive Connectors User Manual
Straight conductive connectors, Install the straight conductive connectors, Save these instructions
Installation Instructions for
Straight Conductive Connectors
1.0
SCONNECTOR_-M-2
980MR2SCC
1
Push the two 2-Circuit Monorail sections completely onto the
conductive connectors.
2-CIRCUIT
MONORAIL
CONDUCTIVE
CONNECTOR
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for indoor dry locations only.
This product must be used with the LBL 2-Circuit Monorail
system only.
M3 SET SCREW
1.5 MM ALLEN
WRENCH
Tighten the M3 set screws with the provided 1.5 MM Allen
wrench. Make sure that the set screw connections are tight for
a proper connection and to avoid heat build up.
Install the Straight Conductive
Connectors
2-Circuit Monorail
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!
A Generation Brands Company
1B
1A
1
2
1B
1A
1
2
2