Install the transformer, 1a 1b, 1a 1c 1a 1d – LBL Lighting 2-Circuit MO Direct Feed Surf Xfmr Mag 500w 120v/12v User Manual
Page 2
2
Install the Transformer
#8-32 FLAT
HEAD SCREW
BACKPLATE
3/32 ALLEN
WRENCH
HOUSING
Loosen
the three #8-32 flat head screws
(Do Not Remove)
with the provided 3/32 Allen wrench.
Rotate the backplate counter clockwise so that the #8-32 flat
head screws are lined up with vertical cut out portion of the
"L" slots.
Remove the backplate from the housing.
#8-32 SCREW
BACKPLATE
Mount the backplate to the electrical box with the provided
two #8-32 screws.
CAUTION:
Turn the power to electrical box off!
Slide the vertical portion of the housing "L" slots completely
onto the three backplate #8-32 flat head screws.
Rotate the transformer housing clockwise to lock the housing
slots around the #8-32 flat head screws.
Tighten the three #8-32 flat head screws with the 3/32 Allen
wrench to secure the transformer in place.
#8-32 FLAT
HEAD SCREW
3/32 ALLEN
WRENCH
HOUSING
Hook the transformer safety wire onto the backplate bracket.
Connect the backplate to a suitable ground in accordance with
local electrical codes.
For each set of power line wires, connect the hot and neutral
wires to the black and white transformer wires, respectively.
SAFETY WIRE
BACKPLATE
BRACKET
NOTE: All transformer power line wires must be
connected to the same phase.
1A
1A
1A
1B
1
2
1
4
3
2
3
4
5
6
7
8
9
10
1A
1C
1A
1D
7
7
10
8
5
6
9
4