beautypg.com

LBL Lighting Clipper/G User Manual

Clipper/g, Install the fixture

background image

1

Installation Instructions for

Clipper/G

1.2

6950_

980CLIPGW

Install the Fixture

G

P

I

:

ENERAL

RODUCT NFORMATION

This product is suitable for outdoor and wet locations.

This product can be dimmed with a standard incandescent dimmer.

This instruction shows a typical installation.

#8-32 SCREW

The fixture base must be grounded in accordance with local

electrical code.

Feed the power line wires through the nipple of the mounting

plate assembly.

Line up two mounting plate holes with the two electrical box

holes and mount the mounting plate assembly to the electrical

box with the two #8-32 screws provided.

For wet location installation, caulk around the mounting

plate with waterproof construction sealant.

MOUNTING PLATE ASSEMBLY

Outdoor

CAUTION - RISK OF FIRE

This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.

Use minimum 90°c supply conductors.

1B

1A

1

4

2

2

3

3

3