LBL Lighting Presidio Wet - Manual (Page 2)

2
Install the Lamp and Shade
In accordance with local electrical codes, make sure that the
crossbar is grounded.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
Place all wires and wire nut connections properly inside the
electrical box.
Level the mounting plate vertically and slide the center hole
completely onto the exposed threaded nipple.
Secure the mounting plate to the threaded nipple with lock
washer and nut.
NUT
LOCK
WASHER
EXPOSED
THREADED
NIPPLE
Place one end of the lamp onto one socket pin, while pushing
the lamp against that socket pin slide the other end onto the
other socket pin.
LAMP
SOCKET
SOCKET PIN
NOTE: Use only your fingers and a soft cloth to install
the lamp.
Use Watt Type MAX 100
T3-118mm, Double End Halogen Lamp.
LOWER GLASS
SHIELD BRACKET
GLASS SHIELD
TOP GLASS
SHIELD BRACKET
Replace the glass shield onto the lower glass shield bracket.
Replace the top glass shield bracket onto the glass shield.
3
4
5
6
7
8
1C 2A
1
1D
2B
1
2
3
4
5
3
1
1
8
7
3
2