LBL Lighting Nikko Grille - Manual (Page 2)

2
Make sure the fixture base is level, and secure it to the nipple
with a lock washer and nut.
Remove all the screws from the front of the fixture.
Lift the cover off of the fixture.
Connect the hot power line wire to the black socket wire with
a wire nut.
Connect the neutral power line wire to the white socket wire
with a wire nut.
Connect the fixture to a suitable ground according to local
electrical codes.
Reattach the reflector to the fixture base.
WASHER NUT NIPPLE
SCREW COVER
Remove the screws on the reflector.
Lift the reflector out of the fixture base.
SCREW
FIXTURE BASE
REFLECTOR
1E
7
7
1F
8
8
9
10
11
9
1D
1C
3
4
5
7
3
3
3 3
5
5
6