LBL Lighting Ambra User Manual

Ambra ceiling, Install the fixture, Ceiling

Ceiling

CAUTION - RISK OF FIRE

This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.

Use minimum 90°c supply conductors.

Installation Instructions for

Ambra Ceiling

1.2

JC399AM_2D100

980AMBRAC

ENERAL

RODUCT NFORMATION

This product can mount to either a 4" square electrical box with

round plaster ring or an octagon electrical box.

This product is suitable for indoor dry locations only.

This product can be dimmed with a standard incandescent dimmer.

Install the Fixture

Place the button head screw and washer from the inside

through one of the canopy holes.

Place the narrow side hole of the shoe horn bracket onto the

exposed button head screw.

Finger tighten the cap nut completely to the button head

screw to secure the shoe horn bracket in place.

NOTE:

There will be a small gap between the shoe horn

bracket and canopy when the cap nut is completely
tighten to button head screw.This gap is necessary when
attaching the glass shade to shoe horn brackets.

Repeat step 1 through 3 for the other two shoe horn brackets.

CAP NUT

SHOE HORN BRACKET

WASHER

BUTTON
HEAD SCREW

Mount the crossbar to the electrical box with the two #8-32

screws.

#8-32 SCREW

CROSSBAR

ELECTRICAL
BOX