LBL Lighting Moon Dance Flush Mount LED - Manual (Page 2)

2
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white driver wire to the neutral power line
wire with a wire nut.
Connect the black driver wire to the hot power line wire
with a wire nut.
2A
1
2
3
1
2 3
Install the Fixture
2B
2 4 Properly place all wires and wire nut connections into
the electrical box.
Mount the fixture onto the threaded studs on the
mounting plate and secure it by tightening the two
cap nuts.
MOUNTING PLATE
2 5
3
1C
MOUNTING
PLATE
Mount the mounting plate to the electrical box with
the two #8-32 screws.
#8-32 SCREW
3
#8-32 SCREW
ELECTRICAL BOX
3
STUD
5
5
THUMB NUT
FIXTURE BASE
3A
2 Align the screw holes in the shade with the fixture base
and install the three shade screw by completely
screwing them in. 1
Install the Shade
1 1
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!