LBL Lighting Top WCF - Manual

1
Installation Instructions for
Top Wall (Compact Fluorescent) 1.4 PW2930FR_13Q
980TOPWCF
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
Install the Fixture
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
Connect the crossbar to a suitable ground according to local
electrical codes.
Connect the white fixture wire to the neutral power line wire
with a wire nut.
Connect the black fixture wire to the hot power line wire with
a wire nut.
NOTE: To mount the crossbar assembly: Use the front
crossbar with an electrical box containing a plaster ring;
Use the rear crossbar with an octagonal electrical box.
ELECTRICAL
BOX HOLE
REAR CROSSBAR
#8-32 SCREW
FRONT
CROSSBAR
Place all wires and wire nut connections properly inside the
electrical box.
Place the fixture canopy onto the crossbar assembly. Level the
fixture vertically; replace and tighten the two #8-32 Phillips
head screws.
#8-32 SCREW
1A
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall
1B
2
3
4
5
6
5
6
2
1
1 3
4