LBL Lighting Casino Two - Manual (Page 2)

2
In accordance with local electrical codes, make sure that the
crossbar assembly is grounded.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
Place all wires and wire nut connections properly inside the
electrical box.
Place the fixture canopy onto the crossbar assembly. Level the
fixture vertically; replace and tighten the two #8-32 Phillips
head screws.
#8-32 SCREW
Install the Lamp & Shade
SOCKET
LAMP
Push the lamp pins completely into the socket holes.
NOTE: Use only your fingers and a soft cloth to install
the lamp.
Use 120 Volt, Watt Type T4, MAX 60
G9 Base, Bi-Pin Halogen Lamp.
Align the glass shade holes with the socket bracket holes and
tighten the four pin screws to secure the glass shade in place.
GLASS
SHADE
SOCKET
BRACKET
PIN SCREW
4
8
5
6
7
8
2
1
8
2
2
2 2
2
2
1C
1D
2A
2B
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
6
4
5
1