LBL Lighting Mini-Rock Candy Cylinder - Manual

1
Installation Instructions for
Mini-Rock Candy Cylinder Wall
980MROCKCW
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Fixture
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical instruction.
With the Allen wrench provided, back out (do not fully
remove) the set screws at the base of the fixture.
Remove the mounting plate from the back of the
fixture.
1
1.0
WALL
1A
2
HW623_2G
ALLEN WRENCH
SET SCREW
MOUNTING
PLATE
1
1B
Attach the mounting plate to the electrical box using
the two #8-32 screws provided. Make sure the notched
end of the mounting plate is at the top.
NOTCHED END
#8-32 SCREW
MOUNTING
PLATE
3
3
3