Install the canopy, Save these instructions, Led version – LBL Lighting Clifton User Manual
Page 4: 1a 5a, 1a 4c
4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.generation-brands.com
© 2014 Generation Brands.All rights reserved.The "Genereation Brands"
graphic is a registered trademark of Generation Brands. Generation Brands
reserves the right to change specifications for product improvements without
notification.
A Generation Brands Company
1A
5A
FIXTURE SCREW
1
1
Properly place the secondary strain relief, transformer (if
applicable), wires, and wire nut connections into the
electrical box.
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the two fixture screws (reversal of
figure 1A).
Install the Canopy
2
1
1A
4C
Connect the mounting plate ground wire and the fixture
ground wire to a suitable ground in accordance with
local electrical codes.
Connect the white (blue) driver wire to the insulated
pendant wire with the white tracer (white wire) using a
wire nut.
Connect the black (red) driver wire to the other
insulated pendant wire (black) with a wire nut.
1
2
3
3
LED Version
DRIVER
1
2
4
5