LBL Lighting Onyx Teardrop Chandelier - Manual

Installation Instructions for
Onyx Chandelier Head 1.3 HJ_1B35MRL
980MRLONYXCH
Install the Lamp
G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
This product is intended to be used with LBL Monorail system.
This instruction is for the following models:
Onyx Cylinder (HJ176ON_1B35MRL)
Onyx Dome (HJ177ON_1B35MRL)
Onyx Teardrop (HJ178ON_1B35MRL)
1
SOCKET
LAMP
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE: Use only your fingers and soft cloth to replace
the lamp.
Use Watt,Type Xelogen MAX 35
(Xenon) Bi-Pin Lamp.
Push the lamp pins completely into the socket holes.
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular
Halogen lamp.A regular Halogen lamp requires a protective
glass shield.
Monorail
1A 1A
1
1