LBL Lighting Mini-Dome II Chandelier - Manual

Installation Instructions for
Mini Dome II Chandelier Head 1.2 HJ275_1B35MRL
980MRLDOMIICH
G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
This product is intended to be used with LBL Monorail system.
1
Install the Lamp
LAMP
SOCKET
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE: Use only your fingers and soft cloth to replace
the lamp.
Use Watt,Type Xelogen MAX 35
(Xenon) Bi-Pin Lamp.
Push the lamp pins completely into the socket holes.
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular
Halogen lamp.A regular Halogen lamp requires a protective
glass shield.
Monorail
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A 1A
1
1