LBL Lighting Sigma Accessory User Manual
Sigma accessory, Install the accessory, Installation instructions for

Installation Instructions for
Sigma Accessory
1.1
HAC479_
980DOMEMACC
Install the Accessory
If the accessory fits tight onto the fixture, then carefully
bend the grooved shade holder tabs in slightly with the
needlenose pliers. If it fits loose, then carefully bend the
grooved shade holder tabs out slightly with the
needlenose pliers.
GROOVED SHADE
HOLDER TAB
1
Use MAX 50 Watt MR16 Front Cover Halogen
Lamp.
Place the optional louver or glass lens into the Snap Louver
Lens Holder.
Place the MR16 lamp into the Snap Louver Lens Holder.
Press the tabs on both sides of the Snap Louver Lens Holder
against the MR16 lamp to keep it in the position.
MR16 LAMP
LOUVER OR
GLASS LENS
TAB
SNAP LOUVER
LENS HOLDER
1
Push the accessory base onto the grooved shade holder.
GROOVED
SHADE HOLDER
ACCESSORY
ACCESSORY BASE
Push the lamp pins all the way into the socket holes.
MR16 LAMP
Accessories
GENERAL PRODUCT INFORMATION:
This product must be used with LBL Lighting systems only.
1A
1A
1C
1A
1B
1
2
3
4
6
5
4
5
3
2
6
1D