Replacing the lamp & shade – LBL Lighting Ooni P User Manual

Page 3

SOCKET ASSEMBLY

GLASS SHADE

SOCKET BRACKET

Replacing the Lamp & Shade

THREADED CAP

Unscrew the threaded cap from the glass shade.

GLASS SHADE

Lower the socket assembly into the glass shade to free the

socket brackets.

NOTE:

To reduce the risk of a burn or electric shock

during relamping, disconnect the power to the fixture.

NOTE:

Use only your fingers and soft cloth to replace

the lamp.

Handle the new replacement lamp with a soft cloth to prevent

the natural oils on the fingertips from collecting on the lamp.

This will help extend the life of the lamp.

Gently insert the new lamp into the socket.

Use MAX 35 Watt, Bi-Pin Halogen Lamp.

Rotate to move the socket assembly from the glass shade.

Remove the old lamp.

Gently insert the socket assembly into the glass shade at an

angle. Rotate so that the socket brackets sit properly around

the glass shade collar.