LBL Lighting Max P - Manual

G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Fusion Jack
™
Use Watt,Type Xelogen MAX 50
(Xenon) Bi-Pin Lamp.
Installation Instructions for
Max 1.2 HS170_
980FSJMAXP
1
Install the Lamp & Shade
Push the lamp pins completely into the socket holes.
Place the glass shade completely into the glass bracket and
tighten the three thumb screws to secure the glass shade in
place.
NOTE: Do not over tighten the thumb screw which may
cause the glass shade to break.
SOCKET
LAMP
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE: Use only your fingers and soft cloth to replace
the lamp.
GLASS
SHADE
GLASS
BRACKET THUMB SCREW
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular
Halogen lamp.A regular Halogen lamp requires a protective
glass shield.
1A
1
2
1B
2
1
2 2