LBL Lighting Celeste P User Manual
Celeste, Install the lamp, Fusion jack™ installation instructions for

GENERAL PRODUCT INFORMATION:
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Fusion Jack™
Installation Instructions for
Celeste
1.2
HS159_
980FSJCLSTP
Install the Lamp
1
LAMP
SOCKET
ASSEMBLY
NOTE:
To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Use
MAX
50
Watt MR16 Front Cover
Halogen Lamp.
Align the lamp pins with the socket assembly holes.
Push the lamp pins completely into the socket holes.
Insert triangle clip through crystal star holes.
Insert the straight end of the triangle clip into the loop end.
Squeeze the ends to lock the triangle clip in place.
CRYSTAL STAR HOLE
TRIANGLE CLIP
CRYSTAL STAR
1A
1
1B
2
3
4
2
3
4
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.