LBL Lighting Icicle P11 - Manual

1
1
THUMB
SCREW
Installation Instructions for
Icicle (Halogen Version) 1.3 HS277_
980FSJICCP11
1
Install the Lamp & Shade
Push the lamp completely into the socket.
Place the glass shade completely into the bracket post and
tighten the three thumb screws to secure the glass shade in
place.
NOTE: Do not over tighten the thumb screw which may
cause the glass shade to break.
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
Use Watt MR11 Front Cover MAX 35
Halogen Lamp.
LAMP
SOCKET
Remove the three thumb screws.
GLASS SHADE
THUMB SCREW
BRACKET POST
1
1A
1B
1C
G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Fusion Jack
™
2
1
3