LBL Lighting Neutron P User Manual
Neutron, Install the lamp

Installation Instructions for
Neutron
980FSJNTRNP
1
Install the Lamp
Push the lamp pins completely into the socket holes.
LAMP
SOCKET
Use
MAX
6
Watt,
MR16 GX5.3 LED Lamp.
NOTE:
To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
WARNING: RISK OF FIRE
Never replace a LED MR16 lamp with a regular MR16
Halogen lamp. A regular MR16 Halogen lamp will melt the
acrylic shade.
1.6
HS390_
1A
1
Feed the fixture coaxial cable through the fixture housing. Slide
the fixture housing down the cord and rest it onto the socket
assembly.
COAXIAL CABLE
FIXTURE HOUSING
SOCKET ASSEMBLY
1B
2
GENERAL PRODUCT INFORMATION:
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
Fusion Jack™
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.