LBL Lighting Monorial fusion Jack Fixture Adapter - Manual

Installation Instructions for
Monorail Fusion Jack Fixture Adapter 1.2 PENDADAPMONOFJ_
980MRLFIXC
G P I : ENERAL RODUCT NFORMATION
This product is ETL listed and suitable only for indoor dry locations
and approved for use at any height above the finished floor.
This product is intended to be used with LBL Monorail system.
1
Unscrew the cap from the Fusion Jack adapter.
Select a place on the Monorail where the fixture is going to be
mounted.
From the top or bottom, place the Fusion Jack adapter onto
the Monorail.
FIXTURE
FUSION JACK
Push and screw the fixture Fusion Jack completely into the
Fusion Jack adapter.
FUSION JACK
ADAPTER
FUSION JACK
ADAPTER
CAP
Replace and tighten the cap to the Fusion Jack adapter.
Make sure that the cap is not cross threaded.
CAP
Install the Fusion Jack Fixture
Adapter onto the Monorail Connect the Fusion Jack Fixture to
the Monorail Fusion Jack Adapter
1A 2A
2
3
4
2
1
1A 1A
4
1A 2A 1A 2A
1A 2A 1A 1B
1
1
1
4
Monorail