LBL Lighting Fusion Jack Wood Canopy 11 Light Round LED - Manual

1
G P I : ENERAL RODUCT NFORMATION
This product is suitable for dry locations only.
This product is dimmable with a low-voltage electronic dimmer.
IMPORTANT! Do not install any head or pendant closer
than 12 inches to this canopy. Heat from the lamp may
damage the wood.
Install the Backplate
Feed the power line wires through the hole in the middle of
the backplate.
Mount the backplate to the electrical box with the two long
#8-32 screws provided.
Lift the backplate out of the canopy.
Remove all the button head screws around the canopy.
BACKPLATE
Installation Instructions for
Fusion Jack 11-Port Round Canopy 1.0 CK011RD-FJ_
980FSJ11PRW
4
3
BACKPLATE
Ceiling
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
1
1B
2
4
3
1C
1
3
1
1
4
4