LBL Lighting Batons Chandelier SCH - Manual

1
Installation Instructions for
Batons 1.0 HS20612_FRSC
980BATONSCH
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical
box with round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
This product can be dimmed with an electronic dimmer.
Optional Heads GB1AM, GB1BU, GB1FR, GB1GR, GB1RD are the
compatible accessories.
Chandeliers
Install the Fixture
Remove the two cap nuts on the dome cover. Mount the crossbar to the electrical box with the two #8-32
screws.
#8-32 SCREW
CROSSBAR
ELECTRICAL
BOX
CAP NUT 1
Remove the canopy housing from the dome cover.
CANOPY
HOUSING
CANOPY
HOUSING
DOME
COVER
Feed the power wires through the canopy housing center hole.
CANOPY
HOUSING
POWER WIRE
DOME COVER
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
1
1B
2
3
4
1C
1D
3
4
2
1
1
3