LBL Lighting Veneto Grande SPCF - Manual (Page 2)

2
Feed the fixture wires through the extension stem(s) and cap.
Tighten the extension stem completely to the socket bushing.
Tighten the top M3 set screw on the busing with the 1.5MM
Allen wrench.
Slide the cap down onto the bushing.
1C
3
4
CAP
EXTENSION STEM
3
4
FIXTURE WIRES
BUSHING
5
Feed the fixture wires coming out of the fixture stem through
the canopy threaded nipple.
Tighten the fixture stem completely to the canopy threaded
nipple. Make sure that the aircraft cables do not get tangled up.
1D
6
7
FIXTURE STEM
CANOPY
THREADED NIPPLE
AIRCRAFT CABLE
2B
Remove the cap screw from the cable bushing.
Remove the knurled nut and one of the plastic washers from
the cap screw.
2
3
AIRCRAFT CABLE
CABLE BUSHING
KNURLED NUT
PLASTIC WASHER
PLASTIC WASHER
CAP SCREW
2
3
5
Use MAX 26 Watt Type Quad Tube
G24q-3 Base Compact Fluorescent Lamp
With Each Socket.
2A
C AUTION: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
For each socket, install the lamp by pushing the lamp pins
completely into the socket holes.
1
1
LAMP
SOCKET
Install the Lamp and Glass Shade
6
7