LBL Lighting Miss Charlie User Manual
Miss charlie suspension, Prepare the fixture, Install extension stem (optional)

1
Installation Instructions for
Miss Charlie Suspension
980MSCHARS
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
Suspension
1.0
LF676_2D
1A
2A
1
1
Prepare the Fixture
SCREW
ALLEN
WRENCH
Separate the crossbar from the canopy by removing all
four screws with the provided Allen wrench.
#8-32 SCREW
CROSSBAR
ASSEMBLY
1B
Mount the crossbar to the electrical box with the two
#8-32 screws provided.
2
Temporarily remove the socket assembly by unscrewing and
pulling the fixture wires through.
Feed the fixture wires through the extension stem(s) and
tighten completely to the threaded nipple socket assembly.
Feed the fixture wires through the stem and out the canopy,
then screw the canopy/stem assembly to the extension
stem/socket assembly.
Install Extension Stem (Optional)
CANOPY
EXTENSION STEM
STEM
THREADED NIPPLE
THREADED NIPPLE
SOCKET ASSEMBLY
2
2
2
3