LBL Lighting Elba S - Manual (Page 2)

2
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2012 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
1C
2 Install the shade by sliding onto the socket assembly.
Re-tighten the shade cap to secure the lamp shade.
3
2 4
Install the Lamps and Diffuser
2A
2 Screw the lamps into the sockets. 1
TOP VIEW
SHADE
FRAME SOCKET
ASSEMBLY
LAMP SOCKET
Use
Type A19 Medium Base Lamp. 120 volt MAX 75 Watt
2B
2C
2 Unscrew the diffuser cap from the socket assembly. 2
DIFFUSER CAP
DIFFUSER
Insert the glass diffuser onto the nipple and secure it
against the shade pegs by screwing the diffuser cap
back into place. 2 3
DIFFUSER CAP
SHADE
PEG
NIPPLE
SOCKET
ASSEMBLY
SHADE
FRAME
SAVE THESE INSTRUCTIONS!
NOTE: To re-lamp, reverse section 2.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.